![]() If some devices on a specific Bus are not acting as intended then you may check the power consumption to make sure the devices are not overtaxing the total power output. If a device with a higher USB standard is placed into a Hub with a lower USB Standard then the ‘bcdUSB’ value may not be reported correctly. The USB Standard for the device is listed under ‘bcdUSB’. My results are shown in Figure 2.Įach device also shows the maximum power usage for the device listed under ‘MaxPower’. Instead of specifying the device number we will only specify a Bus number with the command: ‘lsusb -s 1:’. As we did in Step 1 we will get a list of all devices on Bus 1. I can find out more information on that specific Bus. ![]() You can see that Bus 1 is the USB 2.0 standard. We have only listed the Root Hubs which are always Device 1 on each Bus. The speeds of each bus are determined by the USB standard as follows:įor each device note its Bus and Device number. Root Hubs and not devices show the USB Standard by which it operates, but we can can determine the Standard for each device. Each standard has different capabilities. The number shows the USB Standard for the Hub, such as USB 1.0, USB 2.0 or USB 3.0. The Root Hubs are noted as being ‘Linux Foundation 1.x’, Linux Foundation 2.x’ or Linux Foundation 3.x’. ![]() We will not specify a Bus, but we will specify a specific device with the command ‘lsusb -s :1’ in the Terminal: To get initial information about the USB Root Hubs on the current system we will use the command: ‘lsusb -s :’. Open a Terminal from the keyboard shortcut (CTRL+ALT+T) or from the system menu. ![]() From the information given from ‘lsusb’ we can learn information about the system as well as the USB devices. The basic command ‘lsusb’ will provide information about the existing root hubs and devices attached to the hubs. Using the following method you can determine which port is the primary, secondary and so on. Another issue is that some systems when booting from a USB device you may not know which device is the primary one. To help with such difficulties it is best to understand the abilities of the USB ports on a system. Systems have numerous USB ports and there can arise some complications when connecting too many devices. With the abundance of Universal Serial Bus (USB) devices it is difficult to come across a system which is not using some type of USB device. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |